5 easy fixes to enhance phone signal

The trend of global connection is growing day by day. The major contributor to this trend is the growth in mobile device users and mobile service providers. In addition, smartphones now contribute to convenience and mobility as a substitute for laptops and desktops.
Smartphone user in France
As with every tech, there are times you may encounter signal problems. Either it’s not available, or it’s too weak. In some cases, it may only be a matter of a few buttons, and the phone achieves a better signal strength. However, sometimes you may need to purchase a booster or change the battery to fix the signal strength problem. You can check this out for some accessories you can use that can improve your mobile device’s signal strength.

What To Do To Improve Signal Strength  

Unless you are in a very remote location where there are no cell phone towers, chances are, your phone isn’t responding to signals as it should. Even though there are other reasons which you can’t control, the below simple fixes can help improve your phone’s signal strength.

  1. Turn The Airplane Mode On And Off  

This is one of the quickest ways to apply the signal strength fix. Most smartphones have a quick access panel from which you can tap the airplane mode button to switch it on and off. Depending on your phone’s operating system, you can swipe down or up to view the access panel. Once you swipe, tap on the ‘plane’ icon to enable airplane mode.

Once it’s on, leave for a minute or two, then tap it again to turn it off. Turning on the airplane mode allows the phone to disconnect from all cellular and Wi-Fi connections. When you turn it off, the phone will perform a new search for available connections and connect with the strongest available signal. Generally, this is a good option, especially if you don’t want to turn off your phone completely.

  1. Restart Your Phone  

Mobile devices behave in the same manner as laptops and desktops. Sometimes, when it can’t respond well or slows down, the best way is to perform a restart. Again, how you will perform this fix depends on your operating system. But in general, you need to hold down the power button for two or three seconds. The phone then gives you the option to slide for restart or power off.

If you aren’t on a timeline, the better option would be to turn it off completely for a minute or two, then press the power button once to begin the restart process. Alternatively, you can slide for a restart, and the phone will shut down then begin the restart. Whichever power option you choose, the phone’s OS can drain cached memory and any other junk that may hinder the optimal signal strength of the phone.

  1. Remove Any Interfering Objects  

There are times when your location can affect the signal strength. In such cases, you can’t do much other than move to higher ground or until you find a better signal. However, there may be times when electronic devices contribute to weak signal strength.

Some electronic devices may have electromagnetic fields that interfere with the frequency ranges of your mobile device. This can happen, especially if your home contains several Internet of Things (IoT) devices. If you have such devices, the solution may be to switch them off when you need to use your phone or concentrate them in one section of the house.

One other hack for cell phone signal strength can be as simple as opening a window, a door, going upstairs, or standing at the balcony. These may seem ordinary but may affect your mobile phone’s signal strength.

  1. Ensure Your Phone Battery Isn’t On Low Power 

By default, most devices go to battery saver mode when the battery gets to a certain low charge. This affects how it can receive signals. Sometimes, this can result in it not picking strong signals due to this setting. You can conserve battery by turning off non-essential features like Bluetooth, push notifications, and even deactivating some background processes. This can help preserve battery power longer and ensure its power mainly focuses on signal quality.

You can keep with you a mobile phone power bank or a portable phone charger in case you may need it.

  1. Change Network Settings  

Some phone handsets may come with 5G or 4G network default settings. When this is so, your phone may not detect the generation’s signals in the location where you are. In this case, it would be best to change your network settings to ‘Auto’ so that the phone can detect generation settings depending on area signals.

Most mobile devices will give you options for 2G, 3G, 4G, or 5G and auto. Thus, while doing the network settings, you select auto, and it will pick the right signals as you move around.


To conclude, you can easily fix your phone’s signal strength by applying some of the above quick-fix techniques. However, ensure that your phone doesn’t have any damages, or you are in a signal ‘dead zone’. Otherwise, these fixes should improve your phone’s signal strength.